สะปำซาวด์ภูเก็ต
ตัวแทนจำหน่ายสินค้าคุณภาพชั้นนำแบร์นดังจากยุโรป
อเมริกา และ ญี่ปุ่นเป็นที่ยอมรับทั่วไปในต่างประเทศและเมืองไทย
|
 |
ผ่านการทดสอบ คัดเลือกแล้วว่า สามารถ
ตอบสนองแนวเสียง
ที่ลูกค้าต้องการได้ไม่ว่าจะเป็นรุ่นที่ให้แนวเสียงนุ่มหวานโปร่งใส
เข้าถึงมิติเสียงหรือรุ่นที่ให้ แนวรุนแรงแบบเน้นโชวด์พลัง
รวมทั้งยังมีสินค้าจากจีนและในไทยที่ให้คุณภาพคุ้มราคา
มาใว้บริการอีกด้วย
ที่สำคัญ สินค้าที่เราเลือกมาจำหน่ายต้อง มาจากบริษัทตัวแทนที่มั่นคง
เพื่อรองรับงานบริการหลังการขายในระยะยาวได้
|
|
| Model Number |
HCCA122 |
| Power(RMS/Peak) |
2000 Watts/4000 Watts |
| Fs (Hz) |
35 |
| Qts |
0.53 |
Vas (cu ft) |
0.85 |
| Sensitivity |
84db |
| Mounting Hole Diameter (inches) |
11.9 |
| Mounting Depth (inches) |
10.7 |
|
| Model Number |
HCCA154 |
| Power(RMS/Peak) |
2000 Watts/4000 Watts |
| Fs (Hz) |
33 |
| Qts |
0.6 |
| Vas (cu ft) |
2.648 |
| Sensitivity |
30db |
| Mounting Hole Diameter (inches) |
15.6 |
| Mounting Depth (inches) |
12 |
|
|
| Model Solo-Baric L7 10 |
|
| Size (IN.,CM) |
10, 25.4 |
| Impedance (OHMS) |
2 or 4 DVC |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
1200/600 |
| Sensitivity (dB 1w/1m) |
86.8 |
| Frequency Response (Hz) |
24-100 |
| Mounting Depth (IN.,CM) |
6-1/4, 15.9 |
| Mounting Cutout, Square (IN.,CM) |
9-5/16, 23.7 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
.66, 18.7 |
| Min Rec Vented Box Volume (CU. Ft., Liters)** |
1.25, 35.4 |
 |
| Model Solo-Baric L7 12 |
|
| Size (IN.,CM) |
12, 30.5 |
| Impedance (OHMS) |
2 or 4 DVC |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
1500/750 |
| Sensitivity (dB 1w/1m) |
88.6 |
| Frequency Response (Hz) |
20-100 |
| Mounting Depth (IN.,CM) |
6-11/16, 16.9 |
| Mounting Cutout, Square (IN.,CM) |
11-1/16, 28.1 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
.88, 24.9 |
| Min Rec Vented Box Volume (CU. Ft., Liters)** |
1.75, 49.6 |
|
 |
| Model Solo-Baric S10L5 |
|
| Size (IN.,CM) |
10, 25.4 |
| Impedance (OHMS) |
2 or 4 DVC |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
900/450 |
| Sensitivity (dB 1w/1m) |
86.3 |
| Frequency Response (Hz) |
24-100 |
| Mounting Depth (IN.,CM) |
6-3/16, 15.7 |
| Mounting Cutout, Square (IN.,CM) |
9-5/16, 23.7 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
.66, 18.7 |
| Min Rec Vented Box Volume (CU. Ft., Liters)** |
1.25, 35.4 |
|
| Mode Solo-Baric lS12L5 |
|
| Size (IN.,CM) |
12, 30.5 |
| Impedance (OHMS) |
2 or 4 DVC |
| Max Rec Amplifier Power (WATTS PEAK/RMS) |
1200/600 |
| Sensitivity (dB 1w/1m) |
86.9 |
| Frequency Response (Hz) |
20-100 |
| Mounting Depth (IN.,CM) |
6-13/16, 17.3 |
| Mounting Cutout, Square (IN.,CM) |
11-1/16, 28.1 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
.88, 24.9 |
| Min Rec Vented Box Volume (CU. Ft., Liters) |
1.75, 49.6 |
|
 |
| Model CVT10 |
|
| Size (IN.,CM) |
10, 25 |
| Impedance (OHMS) |
2 or 4 |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
800/400 |
| Frequency Response (Hz) |
25-350 |
| Mounting Depth (IN.,CM) |
4-1/4, 10.8 |
| Mounting Cutout (IN.,CM) |
9-3/16, 23.3 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
.8, 22.7 |
| Max Rec Sealed Box Volume (CU. FT., Liters) |
3.0, 85 |
| Min Rec Vented Box Volume (CU. Ft., Liters)** |
1.25, 35.4 |
| Max Rec Vented Box Volume (CU. Ft., Liters)** |
1.75, 49.6 |
|
| |
|
| Model CVR10 |
|
| Size (IN.,CM) |
10, 25.4 |
| Impedance (OHMS) |
2 or 4 DVC |
Max Rec Amplifier Power
(WATTS PEAK/RMS)* |
800/400 |
| Sensitivity (dB 1w/1m) |
85.5 |
| Frequency Response (Hz) |
25-500 |
| Mounting Depth (IN.,CM) |
5 9/16, 14.1 |
| Mounting Cutout (IN.,CM) |
9 1/4, 23.5 |
Min Rec Sealed Box Volume
(CU. FT., Liters) |
0.8, 22.7 |
Min Rec Vented Box Volume
(CU. Ft., Liters) |
1.25, 35.4 |
|
| |
 |
| Model comp10 |
|
|
| Size (IN.,CM) |
10, 25.0 |
| Impedance (OHMS) |
4 or 8 |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
300/150 |
| Sensitivity (dB 1w/1m) |
86.2 |
| Frequency Response (Hz) |
30-500 |
| Mounting Depth (IN.,CM) |
5-1/16, 12.8 |
| Mounting Cutout (IN.,CM) |
9-1/8, 23.1 |
| Min Rec Sealed Box Volume (CU. FT., Liters) |
1.0, 28.3 |
| Max Rec Sealed Box Volume (CU. FT., Liters) |
2.4, 68 |
| Min Rec Vented Box Volume (CU. Ft., Liters)** |
1.25, 35.4 |
| Max Rec Vented Box Volume (CU. Ft., Liters)** |
1.75, 49.6 |
|
| |
HOOLIGAN / SUBWOOFER
10 Subwoofer
Specifications
MAX Power : 1500 Watts
Voice Coil : 3
Impedance : 4 W + 4 W
Magnet : 82 Oz.
Frequeny Response : 50 Hz ~ 1300 Hz
Sensitivity : 86 dB |
| |
10 Woofer / Black PP cone with foam edge
Specifications
Black PP cone with foam edge
Voice Coil : 38 mm
Magnet : 49 Oz.
MAX Power : 450 Watts
Rated Power : 150 Watts
Impedance : 4 W + 4 W
Sensitivity : 90 dB
Frequeny Response : 32 Hz ~ 1,500 Hz
|
| |
10" Active Subwoofer Box
Specifications
Frequency Response 20 Hz - 150 Hz
S/N Ratio (A-weight) >95dB
THD with 22k filter <.05%
Circuitry Class D
High Level Inputs 8V
 Low Level Inputs 100mV ~4V
Crossover Type Low Pass
Crossover Range 35 Hz -150 Hz
Crossover Slope 12 dB
Bass Boost (45Hz) 0 - 12 dB
Subsonic Filter 24 dB @ 20 Hz
Phase Adjustment 0 /180
Remote Auto Sensing Audio / DC Offset
Protection Circuitry Thermal & Voltage
Remote Level Control Wired Remote
|
| |
MOREL DOTECH OVATION
| SPECIFICATIONS |
DOTECH OVATION 4" |
DOTECH OVATION 5" |
DOTECH OVATION 6" |
| Nominal Impedance |
4 Ohm |
4 Ohm |
4 Ohm |
| Power Handling |
100W |
120W |
140W |
| Max. Transient Power Handling |
300W |
500W |
500W |
| Sensitivity (2.83V/1M) |
88dB |
89dB |
90dB |
| Frequency Response |
50-22000Hz |
45-22000Hz |
40-22000Hz |
| Crossover Point |
3200Hz 6dB/octave |
3200Hz 6dB/octave |
3200Hz 6dB/octave |
Voice Coil Diameter
Woofer:
Tweeter: |
54mm (2.10")
28mm (1.10") |
54mm (2.10")
28mm (1.10") |
54mm (2.10")
28mm (1.10") |
Voice Coil Wire
Woofer:
Tweeter: |
Hexatech? Aluminum
Copper |
Hexatech? Aluminum
Copper |
Hexatech? Aluminum
Copper |
Magnet System
Woofer:
Tweeter: |
Double ferrite rear vented
Neodymium |
Double ferrite rear vented
Neodymium |
Double ferrite rear vented
Neodymium |
Mounting Depth
Woofer:
Tweeter: |
50mm (2")
20mm (0.8") |
60mm (2.36")
20mm (0.8") |
61mm (2.40")
20mm (0.8") |
|
| |
MOREL HYBRID OVATION
| SPECIFICATIONS |
HYBRID OVATION II 4" |
HYBRID OVATION II 5" |
HYBRID OVATION II 6" |
| Nominal Impedance |
4 Ohm |
4 Ohm |
4 Ohm |
| Power Handling |
100W |
120W |
140W |
| Max. Transient Power Handling |
300W |
600W |
600W |
| Sensitivity (2.83V/1M) |
89dB |
91dB |
90dB |
| Frequency Response |
60-25000Hz |
40-25000Hz |
35-25000Hz |
| Crossover Point |
1800Hz |
1800Hz |
1800Hz |
Voice Coil Diameter
Woofer:
Tweeter: |
54mm (2.1")
28mm (1 1/8") |
54mm (2.1")
28mm (1 1/8") |
54mm (2.1")
28mm (1 1/8") |
Voice Coil Wire
Woofer:
Tweeter: |
Hexatech Aluminum
Hexatech Aluminum |
Hexatech Aluminum
Hexatech Aluminum |
Hexatech Aluminum
Hexatech Aluminum |
Magnet System
Woofer:
Tweeter: |
Hybrid rear vented
Neodymium |
Hybrid rear vented
Neodymium |
Neodymium rear vented
Neodymium |
Mounting Depth
Woofer:
Tweeter: |
50mm (2")
20mm (0.8") |
60mm (2.36")
20mm (0.8") |
61mm (2.40")
20mm (0.8") |
|
| |
MOREL ELATE6
| SPECIFICATIONS |
ELATE 5 |
ELATE 6 |
ELATE 9 |
| Nominal Impedance |
4 Ohm |
4 Ohm |
4 Ohm |
| Power Handling |
160W |
200W |
200W |
| Max. Transient Power Handling |
1000W |
1000W |
1000W |
| Sensitivity (2.83V/1M) |
88dB |
89dB |
89dB |
| Frequency Response |
35-25000Hz |
25-25000Hz |
20-25000Hz |
| Crossover Point |
1800Hz |
1800Hz |
1800Hz |
Voice Coil Diameter
Woofer:
Tweeter: |
75mm (3")
28mm (1 1/8") |
75mm (3")
28mm (1 1/8") |
75mm (3")
28mm (1 1/8") |
Voice Coil Wire
Woofer:
Tweeter: |
Hexatech Aluminum
Hexatech Aluminum |
Hexatech Aluminum
Hexatech Aluminum |
Hexatech Aluminum
Hexatech Aluminum |
Magnet System
Woofer:
Tweeter: |
Hybrid rear vented
Double Neodymium magnet |
Hybrid rear vented
Double Neodymium magnet |
Hybrid rear vented
Double Neodymium magnet |
Mounting Depth
Woofer:
Tweeter: |
60mm (2.4")
20mm (0.8") |
61mm (2.44")
20mm (0.8") |
71mm (2.8")
20mm (0.8") |
|
| |
HELIX P 236 Precision
 Specifications
High end 6,5 inch 2-way-system incl. grille: 6,5 inch high end mid/bass speaker with scooped sisal cone, vented 25 mm tweeter and 2-way frequency crossover with integrated tweeter protection
Cont. power RMS / max. power 60 / 80 Watts
Frequency range 45 Hz - 21 kHz
Sensitivity 90 dB 1W / 1m
Impedance 4 Ohms
Mounting depth 60 mm
|
| |
HELIX / ESPRIT SERIES
2-way component system
Specifications
6,5 inch mid/bass with woven fiberglass-cone, 25mm silk dome tweeter with neodymium magnet and separate crossover with integrated tweeter protection
Cont. power RMS / max. power 60 / 120 Watts
Frequency range 55 Hz - 22 kHz
Sensitivity 91 dB 1W / 1m
Impedance 4 Ohms
Mounting depth 65 mm
|
| |
RODEK RS-PMI 6
HIGH PERFORMANCE 2 WAY COMPONENT SYSTEM
Specifications
Woofer : Euro DIN Die cast basket, 6-1/2 inch woven Kevlar/PMI compound cone
rubber surround, chrome plated top and bottom plate
Tweeter : Eyeball 25 mm silk dome neodymium magnet, flash/surface mount
Crossover : High tech crossover with 12dB/octave
SPECIFICATION
Woofer Size 165 mm
WooferV.C Diameter 25 mm
System Impedance 4 W
Power Handling ( RMS ) 70 Watts
Power Handling ( Max ) 120 Watts
Frequency Response 52 ~ 22000 Hz
Sensitivity 90 dB (1W/m) |
| |
GENESIS Five Channel
A complete system solution in one sleek case, our Five Channel can run many different system options due to its superb flexibility. The sub channel has an independent power supply so the front system stays clean even when the sub is working hard. Sub remote included as standard.
Specification:
4 x 50W at 4 ohms + 1 x 200W at 2 ohm |
| |
GENESIS Four Channel
 Our reference Four Channel features twin power supplies for extra energy reserves, ensuring excellent fidelity at any volume level. Independent and fully flexible filtering allows the Four Channel to suit any system.
Specification:
4 x 75W / 2 x 75W + 1 x 250W at 4 ohms
|
| |
GENESIS Profile Four
The most popular Genesis amplifier ever due to its small size and big sound, Profile Four is ideal for 'Front and Sub' systems. System upgrade capability is assured due to the many system options.
Specification:
4 x 50W / 2 x 50W + 1 x 150W at 4 ohms |
GENESIS Profile Sub
Designed to drive modern subwoofers at high levels with perfect control, Profile Sub delivers 500 watts of pure power for bass you can feel as well as hear. Optional Remote Level control for easy level adjustment. Separate Subsonic and Low pass filters for total control Parametric EQ allows tuning of sub system to suit all music styles while Class G keeps everything cool.
Specification:
1 x 350W at 4 ohms / 1 x 500W at 2 ohms |
| |
NXS AUDIO / Full Range Class D
NXD125.4
Specifications
Output Power
@14.4V
4 Ohm 75W x 4
2 Ohm 125W x 4
Bridged 4 Ohm 250W x 2
Circuitry Class D
Frequency Response 10Hz-20kHz
S/N Ratio (A-weight) >95dB
THD with 22k filter <0.08%
Low Input Level 200mV-6V
High Input Level 10V
Remote Auto Sensing Yes
Signal Processing
X-Over Type HP/FULL/LP
Low Pass X-Over Range 50Hz ~ 500Hz
High Pass X-Over Range 50Hz ~ 500Hz
X-Over Slope 12dB
Bass Boost (45Hz) 0dB~12dB
Battery Voltage Range 10.5VDC-16VDC
Size MM (W x D x H) 327 x 191 x 5
|
| |
NXS AUDIO / Full Range Class DNXD500.1
 Specifications
Output Power @14.4V
4 Ohm 250 W x 1 ch
2 Ohm 500 W x 1 ch
Circuitry Class D
Frequency Response 10 Hz - 500 Hz
S/N Ratio (A-weight) >85 dB
THD with 22k filter <0.15%
Low Input Level 200 mV-6V
High Input Level 10 V
Remote Auto Sensing Yes
Signal Processing
X-Over Type LP
Low Pass X-Over Range 50 Hz ~ 500 Hz
High Pass X-Over Range 50 Hz ~ 500 Hz
X-Over Slope 24 dB
Bass Boost (45Hz) 0 dB~18 dB
Subsonic Filter (24dB) 20 Hz
Phase Adjustment 0 - 180o
Remote Level Control Yes
Battery Voltage Range 10.5 VDC-16 VDC
Size mm (W x D x H) 237 x 191 x 55
|
| |
RODEK / DIGITAL SERIES
RA-DIGITAL 480
4 CHANNEL FULL RANGE CLASS D POWER AMPLIFIER
Specifications
Power Output@4 Ohm 80 W RMS x 4 ch
Power Output@2 Ohm 110 W RMS x 4 ch
BridgeOutput@4 Ohm 160 W RMS x 2 ch
 - Variable 18 dB Bass Boost @ 45 Hz
- Frequency Response : 20 Hz to 30 KHz
- Signal to Noise Ratio : More Than 90 dB
- Low Distortion : Less than 0.02%
- Efficiency Ratio : More than 90%
- Various X-Over : Low / High / Full
- Continuously Variable High-Pass Crossover : 50 Hz ~ 180 Hz
- Continuously Variable Low-Pass Crossover : 30 Hz ~ 150 Hz
- Above Ratings Are Base On The CEA-2006 Car Amplifier Standard
- Size L x W x H (mm) : 235 x 180 x 46
|
RODEK / DIGITAL SERIES
RA-DIGITAL 580
5 CHANNEL FULL RANGE CLASS D POWER AMPLIFIER
Specifications
Power Output@4 Ohm 80 W RMS x 4 ch + 200 W RMS x 1 ch
Power Output@2 Ohm 110 W RMS x 4 ch + 200 W RMS x 1 ch
BridgeOutput@4 Ohm 160 W RMS x 2 ch + 200 W RMS x 1 ch
 - Variable 18 dB Bass Boost @ 45 Hz
- Frequency Response : 20 Hz to 30 KHz
- Signal to Noise Ratio : More Than 90 dB
- Low Distortion : Less than 0.02%
- Efficiency Ratio : More than 90%
- Various X-Over : 1/2/3/4 ch / High-Pass / Full Range / 5 ch Low-Pass
- Continuously Variable High-Pass Crossover : 50 Hz ~ 180 Hz
- Continuously Variable Low-Pass Crossover : 30 Hz ~ 150 Hz
- Above Ratings Are Base On The CEA-2006 Car Amplifier Standard
- Remote Bass Control
- Size L x W x H (mm) : 275 x 180 x 46
|
VOLCANO / AMPLIFIER
VAX-4000MKII
4 Channel Bridgeable Power
Amplifier With MOSFET Power Supply
Specifications
Power Output @ 4 Ohm 75 W X 4
Power Output @ 2 Ohm 250 W X 4
Bridge Output @ 2 Ohm 500 W X 2
Full Mosfet power supply
2 Ohm Stable Stereo
Frequency Response 10 Hz - 30KHz
Selectable bass boost ( 6dB , 0dB , 12dB) at 40 Hz
Variable input level gain control
Chrome plated RCA connectors and terminals
THD 0.05%
S/N Ratio > 95 dB
 Full selectable corssover : High / Flat / Low
Variable high pass filter : 120 - 3 KHz
Power & Protection led indicator
Line out & Hi input
Double Coils built in
|
VOLCANO / AMPLIFIER
VAX-1000.1D MKII
Class D MonoBlock Power Amplifier
Specifications
Class D Circuitry ,1 Ohm Stable Mono 1000 W Output
Frequency Response: 15 Hz - 250 Hz
S/N Ratio: 75 dB
T.H.D.: 0.05%
 Variable Low pass: 50 Hz-250 Hz
Variable Subsonic Filter: 15 - 50 Hz [ 12dB/OCT ]
Bass Boost: 0-18 dB at 45 Hz
Input Sensitivity: 200mV - 6 V
Phase Shift Control : 0-180 Degree
3 Protection Measures : Overheat/ Short Circuit/ Overload
Remote Bass Boost Control
1 Gauge Power / Ground Connections
Platinum RCA Connectors and Terminals
|
VOLCANO / AMPLIFIERVAX - 1400
4 CH Mosfet Bridgeable Amplifier
 Specifications
* High Efficiency MOSFET Power Supply
* Supper Clear Signal Amplification
* Bridgeable & Tri-mode Operation
* Building-in Low-Pass Filter & High-pass Fliter
* Thermal / Short Circuit / Overloading Protection System
RMS Power Output @ 4 Ohm 50 w X 4 ch
MAX Power Output @ 4 Ohm 100 w X 4 ch
RMS Power Output @ 2 Ohm 70 w X 4 ch
MAX Power Output @ 2 Ohm 140 w X 4 ch
Bridge RMS Output @ 4 Ohm 140 W X 2 ch
THD @ RMS power 0.04 %
Stereo Separation 90 dB
Bass Boost (at 40 Hz) 0 - 18 dB
Power Supply 11-16 VDC
Fuse 40 A
Dimensions (W x H x L) mm 226 x 47.2 x 300 |
HELIX HXE 100 MKII
 4 Band Parametric Equalizer
Specifications
4 Band Parametric Equalizer with integrated subwoofer pre-amp
- A real highlight for enthusiasts who require perfect sound reproduction.
- Four bands including midrange, band width and level adjustment give the choice of linear and individual tuning.
Max. output : 7 V
THD : 0.005%
Input impedance : 10 KOhms
Mid range frequencies
Sub : 20-70 Hz
Low : 150-400 KHz
Mid : 1.5-4.0 KHz
High : 10-20 KHz
Dimension (HxWxD)mm : 30 x 183 x 109
|
RODEK RA-Graphic 1
 4 Band Parametric EQ. With Integrated , Adjustable Subwoofer Pre - Amp
Specifications
- Active gain preamplifiers with adjustable input sensitivity.
- Volume gain with up to 8 volts RMS of out put.
- Lndividual left and night sensitivity controls for CD input.
- Low noise BL - FET op-amp design yields minimum distortion.
- On-board 30V bi-polar switching power supply.
- Subwoofer outputs and level controls.
- subwoofer frequencies adjustable 60Hz / 90Hz.
- Gold-plated RCA input connectors.
- Main / DVD input selector.
Adjustable Parametric Frequencies SUB 20 -60Hz / LOW 120-130Hz /
MID 1.0-2.4Hz /HIGH 7.0 -20.0Khz
Boost/Cut 18dB
S/N Ratio 100dB
Frequency Response 10Hz - 50Khz +/-1dB
Maximum Output Voltage 7V RMS
THD 0.005
Input Sensitivity 50mV - 3V RMS
Head Room 20dB
Input Impedance 10K Ohms
Output Impedance 50K Ohms
Stereo Separation 82dB / 1Hhz
Operating Voltage 11-15 V Negative Ground
Size(H X W X D) mm 24 X 178 X 110 |
| . . . |
